How To Clean A Driveway - Removing Rust Spots

How-To Article Link:
aconcordcarpenter.com/how-to-remove-rust-spots-…

Spot-Cleaning The Rust Spots

Instead, I spot-treated the rust spots with an acid-based stain remover.

I’ve used ZEP’s Calcium, Lime Scale, and Rust remover [called ZEP CLR for short] on a few remodeling projects in the past (like to salvage claw foot tubs with heavy mineral staining) and it worked amazingly well. ZEP is a time-tested, professional grade cleaner that’s been around for 80 years. It works well and saves you time and money!

Pro Tip:

To start, use the ZEP Calcium, Lime Scale, and Rust remover cleaner on a small, inconspicuous spot to test it before using on the entire stained area. It needs to be rinsed off quickly, so keep a hose handy.

Mixing the CLR Solution

The ZEP Calcium, Lime Scale, and Rust remover is a fast acting, concentrated cleaner. Here’s the best approach to using it for rust stains on a driveway:

1. Mix a 50/50 solution using warm water
2. Apply to surfaces with a stiff brush
3. Rinse after 5–10 minutes
4. Perform a second application at full strength, if needed
5. Rinse again
6. It’s important to always read the manufacturer’s label and follow their instructions.

Pressure Wash Driveway

Once the rust stain was treated, I used Zep All-In-One Pressure Wash and my pressure washer to clean the entire driveway surface.

I simply add this cleaner to my pressure washer’s detergent reservoir and I’m good to go. As both a remodeling contractor and a homeowner, I like construction grade, concentrated cleaners like this, because there’s no futzing around, I simply add the cleaner to the pressure washer and get the job done fast.

The Zep All-In-One Premium Pressure Wash is designed to remove tough oil stains and grime from asphalt, brick, concrete or other aggregate surfaces. [It is not for painted or wood surfaces that will not be refinished.]

Pressure Washing Steps

1. Wet all surrounding vegetation and grass. Saturate soil to avoid plants from soaking up chemical overspray. [You can also cover any plants if desired.]
2. Most driveways have a slope – work on the uphill side of the slope
3. Apply cleaner to driveway – you may need to clean in workable sections
4. Keep surface wet, re-apply cleaner as needed
5. Allow ZEP cleaner to soak in for 5-10 minutes
6. Pressure wash the surface in sections, working in a down-slope direction


Where To Buy
Zep products are available at Lowes and Home Depot and also online. I purchase my cleaning supplies on Amazon here:
Zep Driveway and Concrete Pressure Wash Cleaner Concentrate 128 Ounce ZUBMC128

Zep Calcium Lime and Rust Remover
Final Thoughts
Like I said earlier, a little foresight may have prevented the need to do this project, but that’s not life is it. Stuff happens and we have to deal with it. They key is to use the right tools to get the job done safely, efficiently and effectively.

By following these steps, using a pressure washer, and a well-known Pro-grade cleaner like Zep, you’ll be well on your way to a clean driveway, walkway or patio. #ZepLevelClean