How To Clean ALLOY WHEELS

How To Clean ALLOY WHEELS - DetailingTheWhiteWay Series

► Process recap.
1 - Rinse and flush wheel arch well with pressure washer.
2 - With degreaser applied to inner arch and tyre, scrub!
3 - Rinse down the above and apply Auto-Wheel cleaner liberally (1 wheel at a time)
4 - After 2-3 minutes, start to agitate with a selection of brushes/mitts
5 - Rinse and repeat Auto-Wheel cleaner stage as required or until no further 'bleeding' is noticed.
6 - For tar deposits, allow chemical tar remover to dwell for 30-60 seconds. Wipe away with a damp, clean microfibre towel.
7 - Rinse again thoroughly to remove all residues and repeat process on remaining wheels.
8 - Wipe or blow dry to remove standing water from wheel and tyre.
9 - Apply favourite tyre dressing, wiping away any excess after application for fear of product sling
10 - Admire & go for a drive!

► Amazon Links to the recommended tools, kit and chemicals required:

► UK buyers
◦ Wheel Cleaner: amzn.to/2RersJT
◦ Citrus APC: amzn.to/2KPvVAf
◦ Tar Remover: amzn.to/2QpQyrT
---------------------
◦ Wheel Arch Brush: amzn.to/2DY4nbb
◦ Tyre Brush: amzn.to/2DXzL9S
◦ Detail Factory 1" Brush: amzn.to/2ReK6kX
◦ Wheel Mitt: amzn.to/2DX6qfO
◦ EZ Wheel Brush: amzn.to/2DOb0fF
◦ EZ Wheel Brush: amzn.to/2ReK7oG
◦ Wheel Woolies: amzn.to/2RkjkaU
◦ Vehicle Blower: amzn.to/2CKS9jj
◦ Trolley Jack: amzn.to/2Q9jnK2
◦ Microfibre Towels: amzn.to/2DTykIW

► US buyers
◦ Wheel Cleaner: amzn.to/2ScWg1a
◦ Citrus APC: amzn.to/2MAwy1i
◦ Tar Remover: amzn.to/2B68uix
---------------------
◦ Wheel Arch Brush: amzn.to/2B5xJBD
◦ Tyre Brush: amzn.to/2DCoKcR
◦ Detail Factory 1" Brush: amzn.to/2WlsBlR
◦ Wheel Mitt: amzn.to/2WttzN0
◦ EZ Wheel Brush: amzn.to/2MwJ02n
◦ EZ Wheel Brush: amzn.to/2WnTnKu
◦ Wheel Woolies: amzn.to/2MxNTIs
◦ Vehicle Blower: amzn.to/2S7yfZu
◦ Trolley Jack: amzn.to/2RSIqBY
◦ Microfibre Towels: amzn.to/2ScfNPe

► For the full list of my product recommendations for both the U.K and US including detailing kit, hardware and VLOG equipment, click here - goo.gl/2fNhwj

*NB - it helps to move the vehicle soon after a wash to dry off the brake discs (preventing them from rusting up, thus, sticking and subsequently misting your freshly detailed rims in a horrible orange dust the next time you drive the car)

PS - It's worth noting, this cleaning regime is suited for a 'deeper clean', not something you'd want to do every time perhaps... If your wheels are well protected, regular pH neutral car shampoo or a citrus APC (as above) will be fine. Using a 'fall out' removing wheel cleaner every quarter, 6 months or so dependent on vehicle's usage.

Enjoying the content? Support me! 🙏🏻 (with a coffee) 👉 shorturl.at/glmq3

Subscribe for more youtube.com/whitedetails 👈

🧺 Top 5 - The Channel's Most Shared Products on Amazon
1️⃣ Cartec 3000 Diamond Cut: amzn.to/3SXfeHC
2️⃣ AMDetails Clay: amzn.to/2zUzJMx
3️⃣ Detail Factory Brushes: amzn.to/49wzo0N
4️⃣ Dupray Neat Steam Cleaner: amzn.to/3PWBleB
5️⃣ Bissel SpotClean PRO: amzn.to/3w7Dy0A
↪ Full list: goo.gl/2fNhwj

💷 use Discount code “WD10” for 10% OFF detailing products & equipment at UF Direct - bit.ly/UF-Direct

Instagram: instagram.com/WhiteDetails/
Facebook: facebook.com/WhiteDetails/
📞 07706 566622 - 📧 [email protected] - 🌐 WhiteDetails.co.uk