How to: Hardwire install a dash cam with USB power supply

Guide to installing a USB dash camera wired into the car with properly concealed cabling, no permanent modifications to the factory electrics, and auto power on/off with the ignition switch.

This video covers a single-circuit install with a 5 volt USB power adapter, as USB-powered dash cams don't have a way of implementing a proper parking mode that would necessitate a bit more wiring. If you want a functional parking mode you will need a different camera and different wiring, see this video instead: youtu.be/bAE4gbzCXJE

The dash cam featured is a Viofo A119S.
Review: youtu.be/3UdmoRUWFV8

There are newer versions of this camera now, along with other models with more features.

Viofo Amazon store for these cameras & accessories ~
Amazon US: amzn.to/4hMosky
Amazon UK: amzn.to/3O9fnVn

You can obviously do the wiring any way you like. The way shown uses a fuse tap and a hardwired USB power supply. You will need:
* USB dash cam, see above
* USB cable, length to suit
* 24 or 12 volt adapter for USB, featured is a dual socket unit with cable terminating in an SAE plug. Amazon links ~
US: amzn.to/2C4xDIs | UK: amzn.to/2krC1Ke
* Fuse tap, make sure you get the right size. Amazon links ~
US: amzn.to/2j0Stko | UK: amzn.to/2o3nGZC
* Additional fuse to suit, 5 amps is about right
* Other wiring and crimps or solder as required
* Voltmeter
* Tools to get behind trim. Socket or spanner to work nuts/bolts for ground terminal.

The car featured is Ford Mondeo Mk3. Here's a new video showing the same hardware installed in a VW Golf: youtu.be/soXIRNBUk50

Using the above links supports my channel and is appreciated!