How to Repair RAPTOR Protective Coating?

#1: We need to repair a dent in RAPTOR.
#2: Take off the part which needs to be repaired if you can.
#3: Panel beat the dented area, so that the panel is easier to repair.
#4: Thoroughly degrease the area to be repaired prior to sanding.
#5: Remove RAPTOR from the damaged area with 80 to 120 grit abrasive.
#6: Thoroughly blow off the area and degrease again.
#7: Apply your filler to the damaged area.
#8: Sand to shape when dry with grit 120 to start and finish off with 180.
#9: Abrade the surrounding area which is to be recoated with a fine scuff pad and degrease.
#10: Any bare metal areas should be treated with an appropriate primer.
#11: Apply a light coat of RAPTOR Adhesion Promoter over the area which has been abraded with a scuff pad for optimum adhesion.
#12: Apply a light coat of RAPTOR over the repair area to achieve the required texture.
#13: If using RAPTOR 2K Aerosol, wait for 30 mins and apply a second even coat to achieve a uniform repair. If using a gun, wait for 1 hour.

Don't miss out our TOP TIPS!
www.raptorcoatings.com