Playback starts YouTube’s embedded player (privacy-enhanced mode).
How To Smoke Tail Lights
ChannelPOWERNATIONDescription from the creator
Cars and trucks are just transportation for some people. But for gearheads, it's a reflection of who they are. There are several ways to customize your vehicle - suspension, bigger wheels and tires, etc. Tail lights are another option when it comes to making your ride stand out. There are several aftermarket options available but like anything else, they'll cost you.
Luckily, if the smoked effect is what you're going for, you can do this in your own garage. There are many ways to get it done, some easier than others. The same film that tints your windows can also be used in this application although it takes some skill and patience. Another way is to use transparent paint from a rattle can.
But there's yet another option available. First, you want to use a wax & grease remover to wipe down the light and get it clean. Then sand the light down using a gray scuff pad. Back mask the light so the overspray doesn't get anywhere else. Then give the light a final wipe down with the degreaser. The first substance you want to apply is the adhesion promoter. It's ready to spray and there's no mixing required! At about 16 psi at the inlet of the gun, you just need to lay down one even coat, letting it sit for 30 minutes. Next, mix the black with the intercoat clear. Intercoat clear is basically a clear base coat or what is put down before adding graphics. Pour about 2 ounces of clear into a cup. This mixes 1:1 with reducer. Then add about 1/2 ounce of black to get started. Lay down one coat to start with to see how dark it is before adding more, or thicker coats.
And that's it! That's how easy it is to smoke your tail lights.
Websites:
PowerNationTV.com
PowerBlockTV.com
Facebook Pages:
PowerNation - facebook.com/PowerNationTV
PowerBlock - facebook.com/PowerBlockTV
PowerNation Daily - facebook.com/PowerNationDaily
Detroit Muscle - facebook.com/DetroitMuscleTV
Engine Power - facebook.com/EnginePowerTV
Truck Tech - facebook.com/TruckTechTV
Xtreme Off Road - facebook.com/XtremeOffRoadTV
Twitter:
PowerNation - twitter.com/PowerNationTV
PowerBlock - twitter.com/PowerBlockTV
Instagram:
PowerNation - @PowerNationTV
PowerBlock - @PowerBlockTV
For more on PowerNation, check out PN+ at bit.ly/2oTCIyJ
Luckily, if the smoked effect is what you're going for, you can do this in your own garage. There are many ways to get it done, some easier than others. The same film that tints your windows can also be used in this application although it takes some skill and patience. Another way is to use transparent paint from a rattle can.
But there's yet another option available. First, you want to use a wax & grease remover to wipe down the light and get it clean. Then sand the light down using a gray scuff pad. Back mask the light so the overspray doesn't get anywhere else. Then give the light a final wipe down with the degreaser. The first substance you want to apply is the adhesion promoter. It's ready to spray and there's no mixing required! At about 16 psi at the inlet of the gun, you just need to lay down one even coat, letting it sit for 30 minutes. Next, mix the black with the intercoat clear. Intercoat clear is basically a clear base coat or what is put down before adding graphics. Pour about 2 ounces of clear into a cup. This mixes 1:1 with reducer. Then add about 1/2 ounce of black to get started. Lay down one coat to start with to see how dark it is before adding more, or thicker coats.
And that's it! That's how easy it is to smoke your tail lights.
Websites:
PowerNationTV.com
PowerBlockTV.com
Facebook Pages:
PowerNation - facebook.com/PowerNationTV
PowerBlock - facebook.com/PowerBlockTV
PowerNation Daily - facebook.com/PowerNationDaily
Detroit Muscle - facebook.com/DetroitMuscleTV
Engine Power - facebook.com/EnginePowerTV
Truck Tech - facebook.com/TruckTechTV
Xtreme Off Road - facebook.com/XtremeOffRoadTV
Twitter:
PowerNation - twitter.com/PowerNationTV
PowerBlock - twitter.com/PowerBlockTV
Instagram:
PowerNation - @PowerNationTV
PowerBlock - @PowerBlockTV
For more on PowerNation, check out PN+ at bit.ly/2oTCIyJ
About this tutorial
POWERNATION published this 3:02 video tutorial on November 7, 2019. It has been watched 45,640 times on YouTube.
- Channel
- POWERNATION
- Category
- Autos & Vehicles
- Duration
- 3:02
- Published
- November 7, 2019
- Views
- 45,640
- Likes
- 211
Tags
Share
This tutorial in other languages
- FRComment fumer feux arrière
- ESCómo fumar luces de cola
- PTComo fumar Luzes da cauda
- ITCome fumare luci di coda
- DEHow To Smoke Rückleuchten
- NLHow To achterlichten Rook
- RUКак Smoke задних фонарей
- PLJak palić światła tylne
- JAテールライトスモークする方法
- ARكيفية دخان الذيل الاضواء
- HIटेल लाइट्स धुआं कैसे
- IDCara Asap Lampu Tail