How to build a DIY book press // LARGE A2 Size!

Using some handrails, plywood and steel lead screw I was able to put together a heavy duty, large book press for comparatively cheap!

I used my cnc for most of the cuts but they are simple so you could do it with hand tools or a jigsaw and get the same outcome.

Part list:

1 x 500mm Trapezoidal Lead Screw - 40mm Diameter (got mine from accu.co.uk/)
1 x 40mm Inside diameter Lead screw nut (where ever you buy these parts from will usually suggest the right size for you)
1 x Flange bearing (inside diameter same as your lead screw)
4 x M10 Lag Bolts
Plywood (i went with 15mm thickness, the base and plate are 18mm thick plywood for more rigidity)
2 x 34mm diameter steel rail (each is 750mm length)
8 x steel rail collars, make sure same diameter as your steel tubing
JB Weld On and Gorilla Wood Glue

Shout out to @DASBookbinding for the amazing bookbinding channel and resource he has put together!

💚 Support me 💚
Patreon - patreon.com/thisdesignedthat

---------

GEAR USED:
BEST CAMERA UNDER $1K (US) amzn.to/2GpRCIw | (UK) amzn.to/2Xg7dOo
FAV LOW LIGHT LENS: (US) amzn.to/2QT7aJ5 | (UK) amzn.to/2v7HbRr
FAV MACRO LENS: (US) amzn.to/2VcOa6O | (UK) amzn.to/2V12pPA
GOOD VLOG MIC: (US) amzn.to/2Sdr12I | (UK) amzn.to/2DfVyHU
AMAZING LOW COST LIGHT: (US) amzn.to/2ElMJxg | (UK) amzn.to/2v8A23u
120CM QUICK SETUP SOFTBOX: (US) amzn.to/2IAOBDf | (UK) amzn.to/2F6jcrd