how to build a wall of aerated concrete

We start the construction of the wall. Built from aerated concrete blocks. Foundation ready, waterproofing done.
  We start with the corners. We are planting them at the level of stretching the cord and start first row. First line using a mixture of cement-sand base.
 Our units are very accurate so the next line will use the special glue.
Another valid tool - big rubber hammer.
incised grooves
strikes excess
free from dust, water washing
We are inserting metal rods
We wash again
Filled with glue.
Next layer glued with an adhesive similar to the tiles. The adhesive thickness of 1-2 mm.
Such seam thermal protected.
Before the first row we Place the building blocks of the space inside the walls 1m
In this way, easy to strengthen the line.
Material is at your fingertips.
We can also fiber reinforcement in such a manner (Murfor flat armature) In this case there is no need to form grooves. It is time economy.
We do it in every fourth row.
Tool for precise cutting blocks
liberating restraints use, putting him.
We screw them present boards.
Next topic how to create a lintel above the windows and doors.

We have the fondation and before started to build a wall we need to horizontal waterproofing and vertical thermal insulation. This is to avoid moisture from the ground to the walls and the cold through the foundation in the house.
Vertical thermal insulation sheets suitable for use for leaving the country. In our case it is TENAPORS EPS100- 50mm.
The wall plate or to superimpose the glue with a notched scraper plate and pressed to the wall. The wall must be dry. Adheres very well.
  The next day we cut off the excess with a knife edge, or as I am old jigsaws. Very comfortable.
Very convenient to cut a roll of the required size with inexpensive jigsaws. I have an old and cheap, do not regret. Ruberoid be covered foundation edges at least 1 cm.
 Use liquid bitumen mastic in two layers. The base must be dry and clean from sand. The round corners overlap each other. Nowhere have not manufacture penetrating seam in one place. better clumping imposes weight.
 Pie: - mastic / ruberoid / mastic / ruberoid.
For better adhesion to the wall of the upper layer is recommended for use with roofing felt tiny to full cover at the top edge.

foundation 1. part: youtube.com/watch?v=ZWyCP...


other related topic of measuring tape:
youtube.com/watch?v=3k_wc...
youtube.com/watch?v=p9Pjx...

tile joints and corners : youtube.com/watch?v=9mn7g...

abut tilling :youtube.com/watch?v=VV2mj...

some creative ideas: youtube.com/watch?v=1-TrF...

the best material for home construction: youtube.com/watch?v=5feBZ...

How to start building a House
youtube.com/watch?v=o4g01...

Dirt Rhodes by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/

Satin Sgar "Huma-Huma" Youtube Audio Library