How to Build RC Airliner Boeing 737 Part 4

This is the final part of Boeing 737-300 building video series. In this episode I am going to share with you the rest of the build to finish this RC airliner which are, making dummy engines, motor mounting, install electronics like ESC, servo and pushrods, paint and decal and finally its maiden flight. At first the CG is wrong (12 cm) and almost crash, the correct CG is 17 cm from trailling edge. On this build I learned more about CG and the first time using that type of retract landing gear.

SUBSCRIBE and Like to support this channel
#rcairliner #rcboeing737 #buildvideo

You can download the plans on the link below :
A4 Plans : paper-replika.com/RCplans/PR_Boeing_737_300_Com…
A0 Plans : paper-replika.com/RCplans/PR_Boeing_737_300_Com…
A3 Decal : paper-replika.com/RCplans/united_airlines_73730…

Build instructions :
paper-replika.com/index.php/rc-foam-project/rc-…

DONATE via Paypal : [email protected]

Playlist :
02:39 Dummy Engine
13:02 Control Surfaces
19:39 Servos and Stabilizers
22:42 Motor and Aileron Servos
25:27 Decaling
30:53 ESC, Battery Hatch and Pushrods
35:27 Maiden Flight
30:07 Day #2 Flight
42:57 Day #3 Flight
50:57 Review / Next Model?

Specs :
1. Wingspan 1800mm / 71 inches
2. Flying weight : 2350 grams/ 82.9 oz
3. Wing loading : 53.4 g/dm2 - 17.5 oz/sq.ft
4. Wing cube loading : 8
5. Wing Area : 44 dm2 / 682 sq.in
6. CG : 17 cm from TE
7. 1 set of Servoless Retractable Landing Gear for 3 kg

Electronics
- 2X NTM 2830 1000kv brushless motor
- 2X ZTW ESC 40A
- Battery Lipo 3S 2200mah - 3S 5200mah - Li-ion 3S 3300 mah
- 4 plastic gear 9 gram servos
- 2 metal gear 9 gram servos
- Propeller : 9x5x3 MA style props

Materials :
1. 5mm & 10mm Depron/ Polyfoam
2. 3mm Plywood
4. 0.3mm Mica Plastic
5. hot glue + CA glue + UHU glue
6. white packing tapes amzn.to/3ttYTMp

Tools :
1. Covering iron amzn.to/38YZyMh
2. Heat gun amzn.to/3A1cvkR
3. Hot glue gun amzn.to/38XyrkY