How to clean algae mould mildew on driveway concrete

Professional mould cleaning, manufacture and services
Brisbane, Ipswich & Gold Coast Sunshine Coast Queensland Melbourne Sydney NSW Victoria
Do you have problems with mould, algae mildew moss or nasty smell.
Available from
Polaus Australia
Brisbane, Rocklea
Phone: +6173277 0698
www.polaus.com
[email protected]

Ask us for KleanALGAE algae, black mould cleaner or KleanMOULD Mould and mildew cleaner

Solution to your problems.

How to clean mould, remove mould clean algae, clean moss
You can use water from garden hose or pressure blaster or just simply sweep with broom.
Apply mould remover directly pouring from the container, garden spray pump, watering can, or any different way suitable for particular job. There are no special requirements.
Area covered by mould remover, cleaner will quickly change surface to white foam on the top. This indicates cleaning action. Most of the dirt will be separated from the surface and lift up from the pores. Some places of the surface need to be treated again by applying more product, some of them need agitating for better mould remover penetration. DO not rub and scrub as you will push the dirt back to the surface.
If you want to have the surface extra clean after cleaning, all you need to do is wash of the product and excess dirt with a garden hose or watering can. You can leave mould remover on, surface will be cleaned in 85%-95%. Wait for rain so nature will clean for you or wash of in convenient time.
This is the final look. The surface will be protected from mould growth for 12 - 24 months!!! Of course this is subject to rainfall. Occasionally you may need reapplication in some areas where mould reappears. No More Mould. spray and forget in seconds