How To Connect IP Camera To PC DIY

Getting started with IP cameras can be daunting for those without experience in computer networks. Fortunately, it is not that hard.
To start you will need:
1. IP Camera
2. Network cable
3. AC/DC adapter 12V 2A
4. Router and internet
5. PC or Laptop with CMS software
6. Power adapter extension cable 5.5/2.1 mm
First you will need to Install Security IP Camera Software (CMS) on your PC or laptop, CD came with camera (download link in description).Start by plug in the power source and network cable to the camera. Take the other side of network cable and connect it to the router. You should see light is on at the camera cord. Run the CMS software (download here drive.google.com/file/d/0B9JH0slezVLFcnh6bzNDMm… ) and folow the instruction in the video.
Frequently Asked Questions about IP Cameras Connection to PC:
Can I connect my security IP camera directly to my PC via network cable?

No. the IP camera and the PC use software to connect to each other and talk to each other via the network. There is no need of a network cable between them. The IP camera should be connected to the network (via either network cable or wireless), and the computer and other devices can continue to connect in wired fashion (a laptop can be connected wireless). Make sure your home WiFi security cameras are secure enough.

Can I connect my IP camera to computer without a router?

No. An IP camera needs to connect to the router so that it can have an IP address. Thus the computer can connect to the camera via the IP address in software.

How to connect a security camera to a PC monitor?

For a security system, we usually connect the NVR to the PC monitor so all the cameras will be directly connected to the monitor too. If you don’t have a NVR, you need to connect the cameras directly to the PC monitor. Refer to the steps above how to connect an IP camera to a PC.