HDTutorial
EN

Playback starts YouTube’s embedded player (privacy-enhanced mode).

How To Flush A Hot Water Heater To Remove Sediment

5,813,522 views October 26, 2018 11:33

Watch on YouTube
ChannelAmplifyDIY

In brief

You’ll learn how to safely flush sediment from your hot water heater in about 11 minutes, using just a garden hose, bucket, and screwdriver. This simple maintenance task helps keep your system running efficiently and prevents clogs—ideal for homeowners who want to extend their heater’s lifespan without calling a plumber. The creator walks through each step clearly, including how to check the T&P valve and anode rod during the process.

Key steps

  1. Turn off the heater and cold water supply valve
  2. Attach a garden hose to the drain valve
  3. Open the drain valve and let water flow into a bucket
  4. Allow air into the system to speed up drainage
  5. Inspect the draining water for debris and clarity
  6. Refill the tank completely, then drain and flush once more
  7. Turn the water supply and heater back on

Questions & answers

How do I know if my T&P valve is leaking after flushing?

The creator advises checking for leaks during the annual flushing process.

Chapters

Description from the creator

Check out how easy it is to flush a hot water heater! This is important annual maintenance that will extend the life of your water heater, and help make sure you always have hot water when you need it. The process is very easy, and I show you every step of the way exactly what you need to do and how to do it.

• Materials needed:
🛒 Garden Hose: amzn.to/4aq1WtA
🛒 Small Bucket: amzn.to/4aq1WtA
• Tools required:
🛒 Basic Screwdriver Set: amzn.to/3TZfC9N

(by clicking a link above this channel earns a few pennies, but it does not cost you anything)

Is your drain clogged and too small to get the chunks out? youtu.be/OBPJYg0o_o0
Does your T&P valve leak after this procedure? youtu.be/e5H1i1cypxA
During an annual flushing is also a great time to check your anode rod: youtu.be/OIMz1rwx_jc

0:00 Introduction
0:54 Turn off The Heat
1:50 Turn Off Cold Water Supply
2:10 Connect Drain Hose
2:30 Allow Air Into The System
2:57 Open Drain Valve
4:18 Inspect Draining Water
5:05 Flush In Bursts
6:25 Inspect Water Again
7:00 Completely Fill And Drain Once More
8:45 Final Fill
10:00 Final Steps
10:32 Conclusion

 #HotWaterHeater, #FlushHotWaterHeater, #WaterHeater

Need some of the tools or other items I used in this video? Clicking these and buying something will send a few pennies to help this channel, and does not cost you anything extra:
Garden hose: amzn.to/2NMYaTj
Screwdriver set: amzn.to/2CG6spR
Step ladder: amzn.to/2Xb3GlC
Small bucket: amzn.to/2q20tsK

A kind viewer used screenshots of this video and wrote up a set of written instructions to print out and keep by his water heater. He offered to let me share them with everyone, so if you prefer written instructions, here's a link to his guide: amplifydiy.com/shared/WaterHeaterFlushWrittenIn…

You can help me with future projects!
buymeacoffee.com/amplifydiy

AmplifyDIY is a channel dedicated to do-it-yourself projects with in-depth tutorials on a wide range of subjects.

New videos are published frequently. Want to make sure you don't miss any? Subscribe now!
youtube.com/AmplifyDIY?sub_confirmation=1

Check out the full channel here:
youtube.com/AmplifyDIY

Follow builds in real-time on Instagram!
instagram.com/amplifydiy/

About this tutorial

AmplifyDIY published this 11:33 video tutorial on October 26, 2018. It has been watched 5,813,522 times on YouTube.

Channel
AmplifyDIY
Duration
11:33
Published
October 26, 2018
Views
5,813,522
Likes
103,377

Tags

Share

This tutorial in other languages