How to hook up a 2Channel Remote Control system to a Linear Actuator

We show you the unboxing of a 2CH-RC (Link below) and then show you how to hook up the controller to a Firgelli Linear Actuator. We then show you how to select which button direction you want control the actuator in. We show you how to change from Momentary mode to Sustaining.

Specifications:

Model # 2CH-REM
Radio frequency 422.92 Mhz
2 channel
Each remote has 2 buttons (up and down for the actuator)
Standby current 8.2mA
Max Operating current 10A
2 modes - sustaining (latching), or momentary
Requires 12VDC input (not included)
10 AMP fuse should be used to protect the remote system
Easy to wire actuator to remote control system
Rated up to 10 amps
Operating range -40-80 Degs C

Transmitter:

Voltage : 6 V (CR2016 battery)
Operating current (transmission mode) : lower 8.6 mA
Dimensions : 61mm x 30mm x 12mm
Temperature range -10 to +60 C degrees
Radio Frequency : 433.92 MHz
Remote range : About 40 ~ 70 Meters with full battery power
Sensitivity. -10dBm

Link to product:
firgelliauto.com/products/two-channel-remote-co…