Playback starts YouTube’s embedded player (privacy-enhanced mode).
How to Install a Whole-House Water Softener | Ask This Old House
ChannelThis Old HouseDescription from the creator
This Old House plumbing and heating expert Richard Trethewey visits New Jersey to install a water softener. (See below for a shopping list, tools, and steps.)
SUBSCRIBE to This Old House: bit.ly/SubscribeThisOldHouse
Shopping List for Installing a Whole-House Water Softener:
- Water softener
- Solder
- Copper pipe and valves
- 3/8-inch-diameter plastic tubing
- Compress fittings
- Hose clamps
- Air-gap fitting
- Salt
Tools List for Installing a Whole-House Water Softener:
- Tubing cutter
- Soldering iron
Steps for Installing a Whole-House Water Softener:
1. Turn off the water at the meter.
2. Use a tubing cutter to tap into the existing cold-water pipe.
3. Connect the water softener's resin tank to the cold-water pipe by soldering on an assembly of copper pipe and three valves.
4. Run a length of 3/8-inch-diameter plastic tubing from the resin tank to the salt tank; connect each end of the tubing with compress fittings.
5. Use a hose clamp to attach the drain line to the drain elbow on the resin tank.
6. Install an air-gap fitting to the drain that leads to the sewer pipe.
7. Attach the water softener's discharge hose to the air-gap fitting with a hose clamp.
8. Hook the discharge hose from the washing machine onto the air-gap fitting.
9. Fill the salt tank with salt.
10. Turn the water back on.
About Ask This Old House TV:
Homeowners have a virtual truckload of questions for us on smaller projects, and we're ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers—and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O'Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Roger Cook.
Follow This Old House and Ask This Old House:
Facebook: bit.ly/ThisOldHouseFB
Twitter: bit.ly/ThisOldHouseTwitter
bit.ly/AskTOHTwitter
Pinterest: bit.ly/ThisOldHousePinterest
Instagram: bit.ly/ThisOldHouseIG
bit.ly/AskTOHIG
Tumblr: bit.ly/ThisOldHouseTumblr
For more on This Old House and Ask This Old House, visit us at: bit.ly/ThisOldHouseWebsite
How to Install a Whole-House Water Softener | Ask This Old House
youtube.com/user/thisoldhouse/
SUBSCRIBE to This Old House: bit.ly/SubscribeThisOldHouse
Shopping List for Installing a Whole-House Water Softener:
- Water softener
- Solder
- Copper pipe and valves
- 3/8-inch-diameter plastic tubing
- Compress fittings
- Hose clamps
- Air-gap fitting
- Salt
Tools List for Installing a Whole-House Water Softener:
- Tubing cutter
- Soldering iron
Steps for Installing a Whole-House Water Softener:
1. Turn off the water at the meter.
2. Use a tubing cutter to tap into the existing cold-water pipe.
3. Connect the water softener's resin tank to the cold-water pipe by soldering on an assembly of copper pipe and three valves.
4. Run a length of 3/8-inch-diameter plastic tubing from the resin tank to the salt tank; connect each end of the tubing with compress fittings.
5. Use a hose clamp to attach the drain line to the drain elbow on the resin tank.
6. Install an air-gap fitting to the drain that leads to the sewer pipe.
7. Attach the water softener's discharge hose to the air-gap fitting with a hose clamp.
8. Hook the discharge hose from the washing machine onto the air-gap fitting.
9. Fill the salt tank with salt.
10. Turn the water back on.
About Ask This Old House TV:
Homeowners have a virtual truckload of questions for us on smaller projects, and we're ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers—and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O'Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Roger Cook.
Follow This Old House and Ask This Old House:
Facebook: bit.ly/ThisOldHouseFB
Twitter: bit.ly/ThisOldHouseTwitter
bit.ly/AskTOHTwitter
Pinterest: bit.ly/ThisOldHousePinterest
Instagram: bit.ly/ThisOldHouseIG
bit.ly/AskTOHIG
Tumblr: bit.ly/ThisOldHouseTumblr
For more on This Old House and Ask This Old House, visit us at: bit.ly/ThisOldHouseWebsite
How to Install a Whole-House Water Softener | Ask This Old House
youtube.com/user/thisoldhouse/
About this tutorial
This Old House published this 5:13 video tutorial on November 13, 2016. It has been watched 793,628 times on YouTube.
- Channel
- This Old House
- Category
- Howto & Style
- Duration
- 5:13
- Published
- November 13, 2016
- Views
- 793,628
- Likes
- 3,140
Tags
Share
This tutorial in other languages
- FRComment faire pour installer une toute la maison Adoucissant | Demandez This Old House
- ESCómo instalar una para toda la casa ablandador de agua | Pregunte Esta casa vieja
- PTComo instalar um Whole-House Água amaciante | Pergunte This Old House
- ITCome installare un tutta la casa Dolcificatore | Chiedi This Old House
- DESo installieren Sie ein ganzes Haus Wasserenthärter | Stellen Sie Dieses alte Haus
- NLHoe maak je een hele huis Waterontharder installeren | Ja Deze Old House
- RUКак установить для всего дома для умягчения воды | Задать этот старый дом
- PLJak zainstalować całym domu Zmiękczacz wody | Ten stary dom zapytać
- JA家中軟水をインストールする方法|この古い家を依頼
- ARكيفية تثبيت الجامع البيت مطهر مياه | طرح هذا البيت القديم
- HIएक पूरे सदन पानी सॉफ़्नर स्थापित करने के लिए कैसे | यह पुराने हाउस पूछें
- IDCara Menginstal Whole-House Air pelembut | Tanyakan This Old House