How to Install an Industrial Kitchen Faucet | Ask This Old House

Ask This Old House plumbing and heating expert Richard Trethewey helps a homeowner add an industrial looking faucet to his kitchen sink
SUBSCRIBE to This Old House: bit.ly/SubscribeThisOldHouse

Cost: $250

Skill Level: Moderate

Tools List for Installing an Industrial Kitchen Sink:
Basin Wrench
Adjustable Open End Wrench
Screwdriver

Shopping List:
Faucet
Plumber’s Putty

Steps:
1. Before doing any plumbing work, ensure the water is turned off to the fixture.
2. Use a basin wrench to loosen the nuts holding the old faucet in place.
3. Water supply connections will vary by manufacturer and faucet. It’s often easier to make some of these connections on the countertop before installing the faucet in the sink.
4. Follow the manufacturer’s instructions to ensure the correct installation and order of nuts, washers, and waterproof gaskets. Depending on the faucet, some may require plumber’s putty.
5. Before tightening from below, ensure the faucet handle is oriented correctly and is square to the sink.
6. Once the faucet is secured, connect the water supply hoses to the faucet and shut off valve.

Resources:
Richard installed the Parma Single Handle Pre-Rinse Kitchen Faucet, manufactured by Danze (danze.com/).

About Ask This Old House TV:
Homeowners have a virtual truckload of questions for us on smaller projects, and we're ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers—and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O'Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Roger Cook.

Follow This Old House and Ask This Old House:
Facebook: bit.ly/ThisOldHouseFB
Twitter: bit.ly/ThisOldHouseTwitter
bit.ly/AskTOHTwitter
Pinterest: bit.ly/ThisOldHousePinterest
Instagram: bit.ly/ThisOldHouseIG
bit.ly/AskTOHIG
Tumblr: bit.ly/ThisOldHouseTumblr

For more on This Old House and Ask This Old House, visit us at: bit.ly/ThisOldHouseWebsite

How to Install an Industrial Kitchen Faucet | Ask This Old House
youtube.com/user/thisoldhouse/