HDTutorial
EN

Playback starts YouTube’s embedded player (privacy-enhanced mode).

How to Install: Corsair H100i

5,334 views October 26, 2015 4:04

Watch on YouTube
ChannelJust Kritical

Description from the creator

----------------------------------------Description---------------------------------------
Welcome! Today I will show you step-by-step how to install a Corsair H100i into your system. I know the booklet can be confusing for some so hopefully this helps you out!

PC Specs: (As of this video)
- Intel i3-2100 (Cooled by H100i)
- Gigabyte GTX 960 G1 Gaming
- ASRock B75M R2.0
- NZXT H440
- x2 Seagate 1TB Drives
- Kingston 120GB SSDnow
- 750w SolidGear Neutron
----------------------------------------Instructions---------------------------------------
1. Remove your graphics card and motherboard.
2. Loosely screw in the radiator with 8 short screws and washers.
3. Remove the stock cooler and clean off any thermal paste.
4. Align the backplate and screw in the corresponding standoffs.
5. Install the CPU block front plate and re-install the motherboard.
6. Align the CPU block with the CPU and screw it down with the thumb screws provided.
7. Install the fans onto the radiator with the long screws provided.
8. Adjust and tighten the radiator to the case.
9. Plug in the USB and fan cables to the CPU block. Then plug the USB cord into a USB header. Then plug the power cord into a power connector. Then plug the fans into the Y fan connectors. Finally, plug the pump cable into a 3 pin or 4 pin fan header on the motherboard.
10. Re-install your graphics card and any other panels previously taken off.
----------------------------------------Downloads----------------------------------------
Corsair Link: corsair.com/en-us/support/downloads
(Click the drop down, then click "Corsair Link")
-------------------------------------------Songs-------------------------------------------
Blank by Disfigure: youtube.com/watch?v=p7ZsBPK656s
------------------------------------------Attention-----------------------------------------
I Do NOT own the right to any copyrighted songs in my videos.
----------------------------------------Other Links---------------------------------------
► Intro: I'd Love to Change the World by Jetta (Matstubs Remix): youtu.be/5hEh9LiSzow

► SoundCloud: soundcloud.com/trevidatrev

► Like Us On Facebook: www.facebook.com/goldengeartech ► Donate! paypal.com/cgi-bin/webscr?cmd=_donations&bu…

About this tutorial

Just Kritical published this 4:04 video tutorial on October 26, 2015. It has been watched 5,334 times on YouTube.

Duration
4:04
Published
October 26, 2015
Views
5,334
Likes
19

Tags

Share

This tutorial in other languages