Playback starts YouTube’s embedded player (privacy-enhanced mode).
How to Install Smoke and Carbon Monoxide Detectors | Ask This Old House
ChannelThis Old HouseDescription from the creator
Scott Caron, master electrician for Ask This Old House, wires an old house with new smoke and carbon monoxide detectors.
#ThisOldHouse #AskTOH
SUBSCRIBE to This Old House: bit.ly/SubscribeThisOldHouse
Steps for How to Install Smoke and Carbon Monoxide Detectors:
1. Mark the location of each smoke detector on the ceiling.
2. Use a drill and long, stiff wire to bore a small-diameter hole through the ceiling and into the attic.
3. Go into the attic and check for obstructions around the small holes. If necessary, use a circular saw to cut open the attic floor.
4. At each smoke detector location, use a drill and a 4-inch-diameter hole saw with dust shield to cut a hole through the ceiling for a round old-work electrical box.
5. Run nonmetallic electrical cable from an existing outlet in the attic to each of the smoke detector locations.
6. Cut the cable and pull it through an old-work electrical box. Push the box into the ceiling hole and tighten the screws to lock the box to the ceiling. Repeat for each ceiling hole.
7. Screw the smoke detector's mounting plate to the box, then make the wire connections: black to black, white to white, red to orange.
8. Gently tuck the wires into the box, then twist and lock the smoke detector onto the mounting plate.
9. Install a combination smoke and carbon monoxide detector on each level of the home and within 10 feet of the bedrooms.
10. Pull a new electrical cable down from the attic into the basement.
11. In the basement, install a standard hardwired combination smoke and carbon monoxide detector, and a two-piece wireless smoke and carbon monoxide detector. Mount the battery-powered wireless half of the detector on the first-floor ceiling.
12. Make the final wire connections in the attic, then test each detector to make sure all of them are operating properly.
About This Old House TV:
This Old House is the No. 1 multimedia home enthusiast brand, offering trusted information and expert advice through award-winning television, a highly regarded magazine, and an information-driven website. This Old House and Ask This Old House are produced by This Old House Ventures, LLC and are presented on PBS by WGBH Boston.
Follow This Old House and Ask This Old House:
Facebook: bit.ly/ThisOldHouseFB
Twitter: bit.ly/ThisOldHouseTwitter
bit.ly/AskTOHTwitter
Pinterest: bit.ly/ThisOldHousePinterest
Instagram: bit.ly/ThisOldHouseIG
Tumblr: bit.ly/ThisOldHouseTumblr
How to Install Smoke and Carbon Monoxide Detectors | Ask This Old House
youtube.com/user/thisoldhouse/
#ThisOldHouse #AskTOH
SUBSCRIBE to This Old House: bit.ly/SubscribeThisOldHouse
Steps for How to Install Smoke and Carbon Monoxide Detectors:
1. Mark the location of each smoke detector on the ceiling.
2. Use a drill and long, stiff wire to bore a small-diameter hole through the ceiling and into the attic.
3. Go into the attic and check for obstructions around the small holes. If necessary, use a circular saw to cut open the attic floor.
4. At each smoke detector location, use a drill and a 4-inch-diameter hole saw with dust shield to cut a hole through the ceiling for a round old-work electrical box.
5. Run nonmetallic electrical cable from an existing outlet in the attic to each of the smoke detector locations.
6. Cut the cable and pull it through an old-work electrical box. Push the box into the ceiling hole and tighten the screws to lock the box to the ceiling. Repeat for each ceiling hole.
7. Screw the smoke detector's mounting plate to the box, then make the wire connections: black to black, white to white, red to orange.
8. Gently tuck the wires into the box, then twist and lock the smoke detector onto the mounting plate.
9. Install a combination smoke and carbon monoxide detector on each level of the home and within 10 feet of the bedrooms.
10. Pull a new electrical cable down from the attic into the basement.
11. In the basement, install a standard hardwired combination smoke and carbon monoxide detector, and a two-piece wireless smoke and carbon monoxide detector. Mount the battery-powered wireless half of the detector on the first-floor ceiling.
12. Make the final wire connections in the attic, then test each detector to make sure all of them are operating properly.
About This Old House TV:
This Old House is the No. 1 multimedia home enthusiast brand, offering trusted information and expert advice through award-winning television, a highly regarded magazine, and an information-driven website. This Old House and Ask This Old House are produced by This Old House Ventures, LLC and are presented on PBS by WGBH Boston.
Follow This Old House and Ask This Old House:
Facebook: bit.ly/ThisOldHouseFB
Twitter: bit.ly/ThisOldHouseTwitter
bit.ly/AskTOHTwitter
Pinterest: bit.ly/ThisOldHousePinterest
Instagram: bit.ly/ThisOldHouseIG
Tumblr: bit.ly/ThisOldHouseTumblr
How to Install Smoke and Carbon Monoxide Detectors | Ask This Old House
youtube.com/user/thisoldhouse/
About this tutorial
This Old House published this 7:24 video tutorial on October 26, 2016. It has been watched 1,267,469 times on YouTube.
- Channel
- This Old House
- Category
- Howto & Style
- Duration
- 7:24
- Published
- October 26, 2016
- Views
- 1,267,469
- Likes
- 4,948
Tags
Share
This tutorial in other languages
- FRComment faire pour installer des détecteurs de fumée et de monoxyde de carbone | Demandez This Old House
- ESCómo instalar humo y de monóxido de carbono Detector | Pregunte Esta casa vieja
- PTComo instalar fumaça e monóxido de carbono Detectores | Pergunte This Old House
- ITCome installare fumo e monossido di carbonio Rilevatori | Chiedi This Old House
- DEWie man Rauch und Kohlenmonoxid-Detektoren installieren | Stellen Sie Dieses alte Haus
- NLHoe te Rook en Koolmonoxidemelders installeren | Ja Deze Old House
- RUКак установить дым и угарный газ, детекторы | Задать этот старый дом
- PLJak zainstalować dymu i tlenku węgla Czujniki | Ten stary dom zapytać
- JA煙や一酸化炭素検出器をインストールする方法|この古い家を依頼
- ARكيفية تثبيت الدخان وأول أكسيد الكربون للكشف عن | طرح هذا البيت القديم
- HIधुआं और कार्बन मोनोऑक्साइड डिटेक्टरों स्थापित करने के लिए कैसे | यह पुराने हाउस पूछें
- IDCara Instal Asap dan Karbon Monoksida Detektor | Tanyakan This Old House