How to Make a Carpenter Bee Trap | 5-Minute DIY Project

Hey guys thanks for watching. You can make a carpenter bee trap in about 5 minutes.

Start out with a standard 4x4 post and cut a piece to about 7 inches.

Then drill a hole in the center of the bottom that’s a little less than 1” wide.

Next, you’ll need to drill a 3/8” hole on each side about an inch and a half from the bottom.

These holes need to be drilled at a 45-degree angle and connect to the larger hole you made earlier.

Attach the jar's lid to the bottom using a few nails. Using a half-inch drill bit, drill a hole in the lid.

You can use an eye hook, a bent nail, or like I’m using, an electric wire staple on the top to hang it from.

That’s it. Attach the jar and hang it.

A very simple, yet effective 5-minute project.

Thanks for watching don't forget to Like and Subscribe if you enjoyed and would like to see more!


Green Hill Graphics, LLC
Birdsboro, PA
DecalsNStickers.com
facebook.com/GreenHillGraphicsLLC