How to Make a Full Auto Airsoft Mini Gun [Halo Inspired Mobile Turret]

This is a type of cloud airsoft gun - named so because of how the pellets are blown around the reservoir before being fired out the barrel. Since there is nothing mechanical to get in the way of the workings of this gun the rate of fire is extremely high, an estimated 50 rounds per second.

Warning: It is specifically against manufacturer recommendations to use PVC to contain pressurized air. This video is solely for education and entertainment purposes. Since the creation of this video I have ceased using PVC for air pressure use. This video remains for entertainment purposes only. For pressurized air containment, please only use cylinders and fittings made specifically for that purpose.

I have removed the parts list for this project as I now have an updated cloud airsoft design that utilizes safer and less expensive materials can be seen here: youtube.com/watch?v=r_8wRpgvhyg

Due to mass request I have restored the parts list below, however, if you build this project know that it is against my recommendation. I highly suggest my soda bottle BBMG instead.
-------------------------------------------------------------------------
4' of 2" pressure rated sch40 PVC
4' of 1.25" pressure rated sch40 PVC
2" end caps x2
2" 90 degree elbow
2" 90 degree street elbow
1.25" end caps x3
1.25" couplings x2
1.25"x0.5" threaded reducer
0.5" threaded plug
6mm ID x 3' aluminum tube
Rubber tire valve
Air compressor blower valve w/ threaded ends
Close brass pipe nipple - to fit blower valve
Hose fittings - to fit blower valve - x2
1' air compressor hose - matched to hose fittings
Hose straps - for compressor hose - x2
Large hose straps
1" foam pipe insulation - or a wood block fitted for chamber support #NightHawkInLight

-~-~~-~~~-~~-~-
Check out my latest video: "How To View Invisible Air Currents With Lasers"
youtube.com/watch?v=K94Cc21KEIA
-~-~~-~~~-~~-~-