How to Milk Paint a Metal Door

| Behind The Scenes Design & Discipleship Group | sheholdsdearly.com/behind-the-scenes

This video is about How to Milk Paint a Metal Door
You can view the original blog post here
sheholdsdearly.com/how-to-milk-paint-a-metal-do…

*This post contains affiliate links to products I know &/or love.
You can read my full disclosure here. . .
sheholdsdearly.com/full-disclosure-policy/

Products Needed
Miss Mustard Seed Milk Paint- Altissimo
amzn.to/2K63NHI

Miss Mustard Seed Bonding Agent
amzn.to/2HXHt6k

220 Grit Sand Paper
amzn.to/2K1beQ7

Amy Howard Beeswax
amzn.to/2FSSUX6



We bought this door on a whim. We were in the thick of remodeling and needed something quick. I was at Home Depot and saw it in the clearance section of their parking lot sale.

It was dirt cheap and I called my husband with the measurements, he quickly Ok'ed the purchase and I brought it home. Something got lost in the communication that day and my husband didn't realize just how narrow it was until after it was installed.

Christmas trees and couches have a pain ever since, like trying to fit a camel through the eye of a needle. Ok, not that bad, but the day was have to replace our refrigerator is probably the same day we replace our front door.

In the mean time, I have tried to make do with what we have. For years the door just had primer on it which is impossible to get clean finger prints off of.

Then, I tried my hand at faux painting wood which was really interesting and went surprisingly well. The problem was it didn't photograph well, so in the end I opted for a navy blue milk paint.

Now, I LOVE milk paint, but this was the first time I have ever applied it to metal. I am happy to report that it behaved just like I hoped it would.

Here is a quick run down of what I did. . .

How to Milk Paint a Metal Door

Following the directions on the bag of milk paint, mix your milk paint. I used Artissimo by Miss Mustard Seed. I also added in a Bonding Agent from Miss Mustard Seed to prevent uncontrolled chipping.

Then, using 220 grit sand paper, I spent a few minutes scuffing up the surface of the door to give the paint something to stick to.

After taping of the door knob and deadbolt, I brushed on the prepared milk paint. Be sure to protect the floor!

Once the paint was dry, I did some light distressing with 220 grit sandpaper again until some of the brown and even white was showing through.

Milk paint is almost irridescent because of the pigments in it and sanding lightly will bring out this aspect. This is my favorite thing about milk paint!

Wipe off the dust with a soft rag.

Finally, using Amy Howard's Beeswax, I sealed the whole door by applying with a soft rag.


Related Posts

The Pros and Cons of Milk Paint
sheholdsdearly.com/pros-cons-milk-paint/

Painting a Piano with Milk Paint
sheholdsdearly.com/painting-a-piano-with-milk-p…

Business inquiries: [email protected]

Follow She Holds Dearly elsewhere:

The Blog
sheholdsdearly.com/

Instagram
instagram.com/sheholdsdearly/

Pinterest
pinterest.com/sheholdsdearly/boards/

Facebook
facebook.com/sheholdsdearly/