Playback starts YouTube’s embedded player (privacy-enhanced mode).
How to Rebuild a Brake Caliper (WITHOUT Removing it From Your Car!)
ChannelChristopher Barr - Random ChrisDescription from the creator
In this video I show you how to repair and rebuild a car brake caliper. Refurbishing a brake caliper is a quick, cheap and easy DIY job. Buy brake cylinder repair kits here
➜ amzn.to/2xkckCG 🔔 SUBSCRIBE ➜ youtube.com/@christopher_barr?sub_confirmation=1
The steps involved are:
1: Jack up the car and support on axle stands ('crack' wheel nuts first)
2: Remove wheel
2: Remove the caliper from its mounted position (you can leave the brake line attached)
3: Remove the pads
4: Remove the piston then clamp the brake line
5: Remove the seals and clean up the cylinder
6: Replace the seals
7: Fit the new piston
8: Bleed the brake
9: Clean and de-grease the whole area then re-assemble
10: Test the brakes - if spongy continue to bleed
11: Refit wheel, drop off axle stands, top up brake fluid then test drive vehicle
Why replace a brake caliper when you can refurbish it so easily?
Subscribe to see more of my videos (It's FREE!) ➜ youtube.com/subscription_center?add_user=UClZqT…
Cheers!
Chris 👍
--------------------
'Random Chris' is a Helvellyn Ltd brand. Disclaimer: Due to factors beyond the control of Helvellyn Ltd, we cannot guarantee against unauthorized modifications of this information, or improper use of this information. Helvellyn Ltd assumes no liability for property damage, injury or death incurred as a result of any of the information contained in this video. Helvellyn Ltd. recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, open flames, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Helvellyn Ltd, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not Helvellyn Ltd. Disclosure: any links in this description may be affiliate links. If you decide to buy some items from them, Helvellyn Ltd may receive a small percentage compensation for having suggested the suppliers to you. (This costs you nothing) As an Amazon Associate we earn from qualifying purchases. Helvellyn Ltd only recommends suppliers and products which we believe in, so there is never any conflict of interest.
[Reparación pinza de freno]
#brakecaliper #diy #repair
➜ amzn.to/2xkckCG 🔔 SUBSCRIBE ➜ youtube.com/@christopher_barr?sub_confirmation=1
The steps involved are:
1: Jack up the car and support on axle stands ('crack' wheel nuts first)
2: Remove wheel
2: Remove the caliper from its mounted position (you can leave the brake line attached)
3: Remove the pads
4: Remove the piston then clamp the brake line
5: Remove the seals and clean up the cylinder
6: Replace the seals
7: Fit the new piston
8: Bleed the brake
9: Clean and de-grease the whole area then re-assemble
10: Test the brakes - if spongy continue to bleed
11: Refit wheel, drop off axle stands, top up brake fluid then test drive vehicle
Why replace a brake caliper when you can refurbish it so easily?
Subscribe to see more of my videos (It's FREE!) ➜ youtube.com/subscription_center?add_user=UClZqT…
Cheers!
Chris 👍
--------------------
'Random Chris' is a Helvellyn Ltd brand. Disclaimer: Due to factors beyond the control of Helvellyn Ltd, we cannot guarantee against unauthorized modifications of this information, or improper use of this information. Helvellyn Ltd assumes no liability for property damage, injury or death incurred as a result of any of the information contained in this video. Helvellyn Ltd. recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, open flames, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Helvellyn Ltd, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not Helvellyn Ltd. Disclosure: any links in this description may be affiliate links. If you decide to buy some items from them, Helvellyn Ltd may receive a small percentage compensation for having suggested the suppliers to you. (This costs you nothing) As an Amazon Associate we earn from qualifying purchases. Helvellyn Ltd only recommends suppliers and products which we believe in, so there is never any conflict of interest.
[Reparación pinza de freno]
#brakecaliper #diy #repair
About this tutorial
Christopher Barr - Random Chris published this 15:06 video tutorial on November 7, 2017. It has been watched 2,002,313 times on YouTube.
- Category
- Howto & Style
- Duration
- 15:06
- Published
- November 7, 2017
- Views
- 2,002,313
- Likes
- 22,628
Tags
Share
This tutorial in other languages
- FRComment reconstruire un étrier de frein (sans l'enlever de votre voiture!)
- ESCómo reconstruir una pinza de freno (sin sacarlo de su coche!)
- PTComo reconstruir uma pinça de freio (sem removê-lo o seu carro!)
- ITCome ricostruire una pinza freno (senza rimuoverla dalla vostra auto!)
- DEWie ein Bremssattel neu erstellen (ohne es aus dem Auto zu entfernen!)
- NLHoe maak je een remklauw Rebuild (zonder te verwijderen van uw auto!)
- RUКак восстановить тормозной суппорт (без снятия с Вашим автомобилем!)
- PLJak odbudować zacisku hamulcowego (bez wyjmowania go z samochodu!)
- JA(あなたの車から削除せずに!)ブレーキキャリパーを再構築する方法
- ARكيفية إعادة بناء الفرجار الفرامل (دون إزالته من سيارتك!)
- HIकैसे (अपनी कार से इसे हटाने के बिना!) एक ब्रेक कैलिपर के पुनर्निर्माण के लिए
- IDCara Membangun Kembali Brake Caliper (TANPA Menghapus itu Dari Mobil Anda!)