How to Remove and Replace Exterior Caulk

Home improvement expert Ron Hazelton demonstrates how to remove old caulk from around your outdoor window and door frames and replace it with new caulk, keeping out rain, drafts and bugs. For more videos on outdoor window and door projects, visit ronhazelton.com

Transcript:

You know the joint between your door and window frames on the side of your house is a place where water, draughts, even insects can enter your home. Now typically those are sealed with caulk but after years of exposure to sunlight and weather, well that caulk can fail, just like this.

The first step to solving this problem is to remove the old caulk. Now two tools that work best for me are the putty knife and the utility knife. The putty knife works best for prying away material that's already loose, for more stubborn caulk, try cutting it away with a utility knife and then peel it away.

To make sure the new caulk will adhere properly it's important to remove all the small bits and pieces of old material. For this I like to use a clean, dry paintbrush.

For a sealing job like this I'd recommend a siliconized latex acrylic caulk. The nozzle on a caulking cartridge is tapered, the further back you cut it, the wider the bead of material. Cut the nozzle so that the bead is slightly wider than the gap that you have to fill. Now it's usually best to start at the top and work your way down. Just use constant pressure on the trigger, it will give you a nice uniform bead. Now smooth the caulk off using your finger, again it's best to start up here at the top, finally clean off the excess with a damp rag.

Now, do this job right and use the right materials and you can expect that caulk to last for twenty or thirty years.

Thanks for watching!

Now for more home improvement videos and articles, check out www.ronhazelton.com