How to Resurface a Garage Floor.

In this video, we show you how to resurface a garage floor using ARDEX K 301 Exterior Self-Levelling Concrete Resurfacing Compound which is also ideal for driveways, courtyards and parking areas. It is easy to apply, fast setting; allowing you to walk on it in just 3 hours, and receive light traffic from just 48 hours.

00:00 Intro
00:14 Prepare the surface
00:32 Mix and apply the ARDEX P 51 primer
00:53 Mixing ARDEX K 301
01:00 Applying ARDEX K 301
02:03 Features and benefits
02:12 Contact details

Main features and benefits:
• Levelling and repair rough or damaged exterior concrete
• Walkable after 2-3 hours.
• Can withstand light vehicular traffic after 48 hours
• Apply from 2mm to 20mm thick in a single application
• Can be painted or covered with suitable resin coatings
• Each 25kg bag will cover approximately 7.8m² at 2mm thick

Always refer to the datasheet before use.

Please note that in order to achieve an effective bond, the concrete must be mechanically prepared either by scabbling, grinding or by using contained shotblasting equipment or similar, in order to expose the aggregate within the concrete. The concrete floor in the video above had been effectively prepared during installation and therefore a pressure washer was enough to remove any adhesion barriers to the aggregate exposed surface.

For more product information visit ardex.co.uk/product/ardex-k-301/

Available to order through SIG, Fast-Track Screeding Supplies, Travis Perkins, Resapol, EPMS, Precon and Kestral Construction. Enquire at your local branch or order online.

#Garage #Concrete #Resurfacing #Levelling