How to root Alcatel Flash Plus 2

DISCLAIMER: ROOTING YOUR PHONE WILL PROBABLY VOID YOUR WARRANTY. FOLLOW THIS GUIDE AT YOUR OWN RISK.

DOWNLOAD ALL THE NECESSARY FILES IN THE LINK PROVIDED BELOW.

VCOM/MTK DRIVERS
WIN 7
drive.google.com/file/d/0B8xcIkskgRpkSmRtVEJKb2…
WIN 8 / 8.1
patchworkoftips.com/how-to-install-mediatek-usb…
WIN 10
tehnotone.com/windows-10-mtk-vcom-usb-drivers-f…

FASTBOOT ENABLER
drive.google.com/file/d/0BwAGh1drb91SaGR2U2lKVk…

Minimal ADB and Fastboot
drive.google.com/open?id=0B-Y_5ZN5J9vTeDAwWUxkQ…

FLASHTOOL : SPFT
drive.google.com/file/d/0BwAGh1drb91SSjhsNkxtVz…

V6 Boot Patched backup / TWRP-Backup_boot_patched.rar
drive.google.com/file/d/0BwAGh1drb91SMzBlSDZuUz…

SuperSU
forum.xda-developers.com/apps/supersu/stable-20…

Flashtool Rom FP2 v6 Optimized (fastboot ready)
drive.google.com/file/d/0BwAGh1drb91SeDZwV1VXbX…

1. Download and extract all the files In the description
2. Install VCOM/MTK drivers according to your Windows O.S.
3. Open ADB and Fastboot folder and install adb-setup-1.4.3.exe & UniversalAdbDriverSetup6.msi
4. In your Flash Plus 2, create a TWRP folder in your SD Card.
TWRP-backups-(your device serial number will be the name of this folder, go to About phone-Status-Long press the Device Serial number to copy)
5. Copy this folder “2017-03-25--20-01-00” from TWRP-Backup_boot_patched.rar to TWRP folder that you’ve created. Also copy the SuperSU.zip to the root of your SD Card.
6. Enable USB Debugging and OEM unlocking in your phone. Go to About phone tap 5x the Build number to enable Developer options.
7. Now we will enable fastboot mode and unlock the OEM.
8. Open flash_tool.exe in the SP_Flash_Tool_v5.1636_Win folder, choose the Scatter loading file from the fastboot folder (“MT6755_Android_scatter.txt”), then choose the Authentication fie from the SP_Flash_Tool_v5.1636_Win folder (“MT6755_SHINE_PLUS.auth”).
9. Turn off your phone, click download, then connect your Flash Plus 2 to your PC via USB cable.
10. Wait to finish, you will see a pop-up with green check icon.
11. Turn on your phone, make sure USB Debugging and OEM unlocking are still enabled.
12. In your PC, open MAF32.exe from ADB and Fastboot-- Minimal ADB and Fastboot folder.
13. Turn off again your Flash Plus 2 then go to Fastboot mode, press VOLUME UP + POWER BUTTON, (Power button to select) select English--Reboot to bootloader then long press power button, you should see Fastboot mode at the bottom left of the screen.
14. Connect your phone to PC, in the command prompt (MAF32.exe) type this: fastboot oem unlock
Then press enter, in your phone press volume up to unlock the oem (this will format your phone) and wait to finish.
15. After oem unlocking turn off your phone, just long press the power button for about 10 seconds.
16. In your PC, open again the flash_tool.exe in the SP_Flash_Tool_v5.1636_Win folder, choose the Scatter loading file from the FP2-V6-OPT-Flashtool folder (“MT6755_Android_scatter.txt”), then choose the Authentication fie from the SP_Flash_Tool_v5.1636_Win folder (“MT6755_SHINE_PLUS.auth”).
17. Click Download then connect your phone to PC, wait to finish.
18. Reboot again to fastboot mode, press VOLUME UP + POWER BUTTON, (Power button to select) select English--Reboot to bootloader then long press power button, you should see Fastboot mode at the bottom left of the screen.
19. In your PC, open again MAF32.exe from ADB and Fastboot--Minimal ADB and Fastboot folder.
20. Then type this: fastboot boot recovery.img
21. Press Enter, then connect your phone to PC.
22. Your phone will boot into TWRP Recovery mode
23. In the TWRP Recovery, go to Restore then select “2017-03-25--20-01-00” from the TWRP backup folder that you created, then swipe to Restore.
24. Go back to the main screen, Select Install and select the SuperSU.zip from your SD card then Swipe to confirm Flash.
25. Wait to finish, go back to main screen Select Reboot-System
26. Wait for your phone to boot up, it might take a while.
27. Done. Your Flash Plus 2 is now rooted.

***
IF YOUR PHONE GOES TO RED STATE
Turn off the phone by pressing the power button for about 10 seconds, then repeat the steps 18-23. Reboot, it should be in orange state.

***
To enable 4G dial this: *#857857#

***
ADDITION:
If the “MT6755_SHINE_PLUS.auth” file is missing in "SP_Flash_Tool_v5.1636_Win" folder, I reuploaded the file download this.
dropbox.com/s/opsl31xgo4c6gdv/MT6755_SHINE_PLUS…