How to Stain Concrete Floors with SPARTACOTE polyaspartic stain coating system HD

This application includes water-based Vivid Dye red, Aqua-Flex WB fast-cure epoxy primer, and SPARTACOTE® FLEX SB topical polyaspartic sealer.

Over a properly prepared surface at CSP 2 or 3, apply Vivid Dye, spraying the stain in a uniform fashion. Vivid Dyes ship in water-based or acetone formulations.
Stain drying times vary, depending upon your application’s conditions.

Upon drying, lightly pad oversprayed areas to clean up excess material from the surface.

Mix 2-part epoxy Aquaflex WB. Broom or squeegee fast-curing Aquaflex onto the surface. … Follow by backrolling the primer. … Aquaflex WB goes down milky white, and dries clear. Cure time is approximately 2 hours.

After Aquaflex WB epoxy cures, prepare the SPARTACOTE® polyaspartic topcoat sealer. Put down a ribbon of material onto the cured epoxy surface. Broom SPARTACOTE® topcoat sealer around the area in a u-shaped fashion. Follow the broomed polyaspartic material with a roller, working the coating in.

Finally, back-roll the SPARTACOTE® topcoat sealer in a perpendicular fashion.

To learn more visit: laticrete.com/en/solution-center/featured-solut…