Guitar Wiring and Soldering: Basic Technique Tutorial

Want a Guns and Guitars shirt? buy one here: teespring.com/stores/guns-and-guitars-official
Facebook: facebook.com/gunsandguitarsofficial
Instagram @gunsandguitarsofficial
Support me on Patreon: patreon.com/danthompson

This is a quick guide to soldering guitar electronics. I share a few tips and tricks I've learned, as well as show you what tools you need for this (and they are inexpensive too!)

*Prices mentioned in this video are subject to change without notice. Please check the links below for current pricing.

Here are the tools and components I use in this video:

soldering iron kit:
amzn.to/2GMuOkA

solder tip cleaner:
amzn.to/2Qbx1Zn

tip tinner:
amzn.to/2wO0QGy

wire strippers (not the exact ones I have, but these are basically the same and have good reviews):
amzn.to/2NUfKlS

22awg hookup wire:
amzn.to/2QiH2Ei

60/40 solder:
amzn.to/2wQfc9x

handy helper:
amzn.to/2wTpHbY

Deoxit D5 electronics cleaner/lubricant:
amzn.to/2CJYPSb

here are the pots I use (If I replace the kits ones):
amzn.to/2oQDRqW
or these if I'm impatient:
amzn.to/2QbhatT

These are the dpdt switches I use:
2 position on/on:
amzn.to/2NqnBL7
3 position on/off/on:
amzn.to/2oNWM5B
3 position on/on/on:
amzn.to/2sY0kVn

copper shielding tape (with conductive adhesive):
amzn.to/2Np2dG2

Full disclosure: I am an Amazon Associate, and the links in this description are affiliate links, which means that if you make a purchase, it doesn't cost you any more money, but I will earn a commission.

So to summarize this video:
-strip and TWIST the wire
-get a solid connection that will hold still while soldering (I use the 90 degree bend method)
-make sure your components are hot so the solder will stick
-don't hold the iron to the component too long or you can burn it out.
-a good solder joint will be shiny, and will be stronger than your wire or the component you soldered to. test this to make sure!