How to Increase Internet Connection and Disable Auto Tuning

0:00 Ethernet Properties

Uncheck the following items:
Client For Microsoft Networks
File and Printer Sharing for Microsoft Networks (If you have a printer, let enable)
QoS Packet Scheduler
Microsoft LLDP Protocol Driver
Internet Protocol Version 6 (TCP/IPv6)
Link-Layer Topology Discovery Responder
Link-Layer Topology Discovery Mapper I/O Driver

0:20 Network Adapter Settings
[-Network Adapter Settings-]
ARP Offload - Disable
Auto Disable Gigabit - Disable
Energy Efficient Ethernet - Disable
Flow Control - Disable (Can Be Buggy If Enabled)
Green Ethernet - Disable
Header Data Split - Enable
Interrupt Moderation - Disable (Lower Ping)
IPv4 Checksum Offload - Disable (Lowered Ping)
Jumbo Frame - Disable (Glitchy If Enabled)
Large Send Offload v2 (IPv4) - Disable (Sporatic If Enabled)
Large Send Offload v2 (IPv6) - Disable (Sporatic If Enabled)
Maximum Number of RSS Queues - 4 Queues (Highest Number)
Network Address - No Changes
NS Offload - Disable
Priority & VLAN - Priority & VLAN Disable
Receive Buffers - 512 (Highest Number)
Receive Side Scaling - Enable (Uses All Processors)
Shutdown Wake-On-Lan - Disable
Speed & Duplex - 1.0 Gbps Full Duplex (If you see that your download speed is slow after changing this option,just back to Auto Negotiation)
TCP Checksum Offload (IPv4) - Disable
TCP Checksum Offload (IPv6) - Disable
Transmit Buffers - 128 (Highest Number)
UDP Checksum Offload (IPv4) - Disable
UDP Checksum Offload (IPv6) - Disable
Wake on Magic Packet - Disable
Wake on pattern match - Disable
WOL & Shutdown Link Speed - Not Speed Down

1:34 Network Adapter Power Management

Open CMD as admin and paste this command
powercfg -devicedisablewake "Realtek PCIe GBE Family Controller"

2:23 Disable NetBIOS over TCP/IP
2:55 CMD Tweaks
Open CMD as admin and paste this commands
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disabled
netsh int tcp set global congestionprovider=ctcp (In windows 10, this tweak has change the name)
netsh int tcp set global rss=disabled
netsh int tcp set global chimney=enabled

3:40 Local Group Policy Editor (gpedit.msc)
4:17 Regedit Tweak #1
Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters
Create a DWORD value with the following name
DisableBandwidthThrottling (DWORD value) Value Data - 1 (Hexadecimal)
EnableWsd (DWORD Value) Value Data - 0

5:01 Regedit Tweak #2
Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Multimedia\SystemProfile
Double Click in NetworkThrottlingIndex (DWORD value), and put ffffffff (Hexadecimal) or you type 4294967295 (Decimal) as a value data.

5:42 Regedit Tweak #3
Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Performance
Create a DWORD value with the following name
GlobalMaxTcpWindowSize (DWORD Value) Value Data - 3fffffff (Hexadecimal) or you can type 1073741823 (Decimal) as a value data.
After, go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
Create a DWORD value with the following name
GlobalMaxTcpWindowSize (DWORD Value) Value Data - 3fffffff (Hexadecimal) or you can type 1073741823 (Decimal) as a value data.

6:48 Use a DNS in your Network Adapter
Here's the link for download the DNS servers list - goo.gl/V9hI3c