How to Replace 2006 - 2009 Saab 9-5 Xenon Headlight Bulbs - Part 2

In this video, I show you how to re-install your 2006 - 2009 Saab 9-5 headlight assemblies after having replaced the bulbs. Additionally you will learn how to re-install your bumper cover.

This is Part 2 of 2, and includes Headlight Installation, Testing, & Bumper Cover Installation.

Part 1 shows you how Removing the Bumper Cover, Removing the Headlight Assembly, and Replacing the Xenon Bulb.

Here are the bulbs I purchased to have a factory stock look:
- Osram D1S Bulbs (The SAAB 9-5 requires D1S)
- amzn.to/2IF5XCc

Tools you need:
- 8 mm socket
- 10 mm socket
- T25 Torx Socket
- T30 Torx Socket
- Trim tool or hard plastic wedge
- Punch or Phillips-Head Screwdriver
- Flat-Head Screwdriver
- Wrenches
- Extension

If you have any questions, leave a comment down below. I hope this video is helpful to you and helps you save some money and enjoy your Saab even more.

This video applies only to the 2006 - 2009 Saab 9-5 with Vision Package or Xenon Headlamps. This is not the process for 1999-2005, or 2006+ with Halogens.