How To: Program and Gang Aileron Servos with Hitec Brushless Servos and Jeti Radio

While there are many different ways to gang aileron servos, I wanted to share how I do it using programmable Hitec Brushless servos and a Jeti radio system. While I was building my Extreme Flight 105" Slick 580, I filmed this tutorial.

Even if you're not interested in ganging servos like this, you can still see a good example of using the Hitec DPC-10 software to program your servos...along with how to get the resulting programming to match your Jeti EPAs.

In this Video, you'll see:
1. A strategy to gang aileron servos
2. How to Program Hitec Brushless servos using the DPC-10 and software
3. How to use the programmer and radio at the same time to perfectly match the servos
4. The correct EPA settings on a Jeti radio for programmable Hitec brushless servos

Benefits of this method:
1. Each aileron's servos run off the same channel
2. No subtrim to match servos
3. Almost no (if any) binding

What you will need:
1. Straight Edge that spans both servo pockets
2. The desired max deflection of ailerons before you start
3. Hitec Brushless servos, DPC-10, Windows laptop
4. Jeti Radio System