How to program a Chevrolet Silverado remote key fob 1999 - 2006

An easy to follow video on how to program a remote key fob for a 1999 - 2006 Chevrolet Silverado.

More free keyless entry programming instructions available at ProgramYourRemote.com/

1. Close all vehicle doors.
2. Insert the key into the ignition.
3. Hold down the power UNLOCK button on the driver’s door panel-continue to hold down until instructed to release in step 9.
4. Perform steps 5 through 8 in fairly rapid succession.
5. Turn the ignition switch to the ON position (as far as you can go without starting the engine).
6. Turn the ignition switch to the OFF position.
7. Turn the ignition switch to the ON position.
8. Turn the ignition switch to the OFF position.
9. Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically.
10. Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until the door locks and unlocks. This step may take up to 30 seconds.
11. Repeat step 10 NOW for each additional transmitter (including any existing transmitters).
12. Turn the ignition switch to the ON position in order to exit the transmitter programming mode.

THIS PROCEDURE WORKS ON THE FOLLOWING VEHICLES:
2003 - 2007 Buick Rainier
2002 - 2006 Cadillac Escalade
2000 - 2002 Chevy Astro
2002 - 2006 Chevrolet Avalanche
1998 - 2005 Chevrolet Blazer
1999 - 2006 Chevrolet Silverado
2000 - 2006 Chevrolet Suburban
1998 - 2004 Chevrolet S10
2000 - 2006 Chevrolet Tahoe
2002 - 2009 Chevrolet Trailblazer
2002 - 2009 GMC Envoy
2003 - 2008 Isuzu Ascender
1998 - 2004 GMC Jimmy
2000 - 2003 GMC Safari
1999 - 2006 GMC Sierra
1998 - 2004 GMC Sonoma
2000 - 2006 GMC Yukon
2001 - 2006 GMC Yukon XL
2002 - 2006 GMK Yukon Denali
2003 - 2006 Hummer H2
2002 - 2004 Oldsmobile Bravada