HDTutorial
EN

Playback starts YouTube’s embedded player (privacy-enhanced mode).

How To Fix Windows Blue Screen "Recovery - Your PC/Device needs to be repaired"

967,092 views October 31, 2019 13:01

Watch on YouTube
ChannelJeff Baker

Description from the creator

How To Fix Windows Blue Screen "Recovery - Your PC/Device needs to be repaired"

----------------------------
You may also like: 🎤 Speech Recognition Anywhere - Browser Extension: chromewebstore.google.com/detail/speech-recogni…
----------------------------

Jeff Baker here with Sea Breeze Computers. If all of a sudden when you turn on your Windows computer you get the Blue screen that says, "Recovery - Your PC needs to be repaired". Here are some steps that will hopefully help you fix the problem.

0:34 1. Windows Installation Media

If you don't have Windows Installation Media then you can download and create it from a working computer by going to the website microsoft.com/software-download and clicking on your version of Windows and click on "Download Tool Now".

1:37 2. Boot to the Windows Installation Media

5:02 3. Command Prompt

Once the Windows Installation Media starts loading you should get to the Windows setup screen where it asks for the "Language to install" and the "Keyboard or input method". Press Shift+F10 on your keyboard at the same time to enter command prompt.

5:29 4. Backup Important Files

At this point you may or may not want to backup important files.

7:00 5. Check hard drive for errors

First type bcdedit and press enter. Notice the drive letter at "osdevice" and "partition". It is usually C: or D: but it could be another letter. Write this letter down as your OS drive letter.

Now type: chkdsk C: /R and press enter. Replace C with D or whatever your OS drive letter is.
The scan for errors may take a few hours. So you will have to wait. When it is finished then take notice of how many bad sectors there are. If there are any bad sectors then you will need to purchase a new hard drive and reinstall Windows on to it. If there are 0 bad sectors then that is a good sign. Try restarting the computer and see if Windows starts normally.

8:22 6. Repair Boot Data

If Windows still does not start normally then you will need to boot the Windows Installation Media again and try the following commands at command prompt:

bootrec /fixmbr
bootrec /fixboot

Close the command prompt and try to restart the computer.

9:00 7. Rebuild Boot Configuration Data

If Windows still does not start normally then you may want to try this command at command prompt:

bootrec /rebuildbcd

and press enter. If you see the message "Total identified Windows installations: 1" then press Y to Add installation to boot list. Restart the computer and see if Windows starts normally.

9:36 8. Repair Boot Data with System Partition

If Windows still does not start normally then you can try to repair the Boot Data with the system partition. At the command prompt type: bcdedit and press enter. Notice the drive letter at "osdevice" and "partition". It is usually C: or D: but it could be another letter. Write this letter down as your OS drive letter. Also take note of "systemroot". It will probably be \Windows

So if you put it together then your OS drive letter and system root are something like:
C:\Windows


At the command prompt type: diskpart and press Enter.

Then type list volume and press enter. Take note of the "System" or "System Reserved" partition. Write down the Volume number. In the example here it is Volume 3.
Type: select volume 3 and press enter. Replace 3 with your "System" volume.
Then type: assign letter=Z and press enter.
Type exit and press enter.
Now type:
bcdboot C:\windows /s Z: /f ALL

Remember to replace C:\Windows with the OS drive letter and systemroot that you wrote down earlier. Press Enter.

Restart your computer and see if Windows starts normally. If it does not then try this command in command prompt:

bcdboot C:\windows /s Z: /f UEFI

Remember to replace C:\Windows with the OS drive letter and systemroot that you wrote down earlier. Press Enter.

Restart your computer. Hopefully one of these steps worked and your computer will be able to start Windows normally without the blue screen error message. If none of these steps work then you may need to backup any important files and reinstall Windows. Or you may need to get help from a computer technician.

About this tutorial

Jeff Baker published this 13:01 video tutorial on October 31, 2019. It has been watched 967,092 times on YouTube.

Channel
Jeff Baker
Duration
13:01
Published
October 31, 2019
Views
967,092
Likes
6,653

Tags

Share

This tutorial in other languages