How to INSTALL a SCREW into a WALL (anchor) drywall

Welcome to another video, this time it's about how to put a screw in a wall. If you want to hang a painting, some light shelving a guitar hanger, this how to video is for you. There are many ways to install screws into regular drywall but this is the way that I have found to be most effective. Many people online, and YouTube especially, say that you should have a drill as part of this process. I say NO. No drill is needed. You simply need some drywall anchors and a Philips-head screw driver. Please be aware that this style of screw is not intended to be used with heavy stuff. So please do not mount any TV's on the wall using these anchors. The heaviest thing that I have hung up on the wall using these anchors was a clothing bar using the actual shelf support that was shown in this video. It held up well being weighed down with a full 24 inches worth of bar fully loaded with clothes. Watch and enjoy!
Steps:
Locate your area you want to have your thing put.
Locate the studs nearby and AVOID them.
Somewhere BETWEEN the studs, mark your holes.
On the marked holes place your screwdriver and firmly hit the screwdriver inward to the wall, piercing a hole into the wall. (be sure not to do it to hard or you will go completely through to the other side of the wall!)
After your hole is punched screw in the plastic anchor.
After that it is good to put the screw in all the way to ENGAGE the anchor.
After that put your thing up! Drywall is what i installed this on.

Congratulations you have just installed a screw into the wall!
This has been brought to you buy TRYtoHELPyou.com