Nespi 4 Retropie: Safe Shutdown and Safe Reset Script Tutorial

█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█
[Synopsis]

This video shows you how to enable the safe shutdown, and reset feature for the Nespi 4 Raspberry Pi 4 case. The reset and power button are functional in this case, so you have to enable it in your case, and install the script in Retropie. If you are using Batocera, or Recalbox, the script will be different from this one, but the procedure will be the same.
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
[Procedure]

♠ Turn on the safe shutdown switch in your Nespi 4 case
♠ Change the keyboard settings
♠ Let Retropie reboot
♠ In Retropie press the "F4" key to go into terminal.
♠ Type in the following script. When you enter the script, make sure you type in everything correctly
, or it will not work. Caps are important. If there is a cap you must enter it.

• For RETROPIE
wget -O - "raw.githubusercontent.com/RetroFlag/retroflag-p…; | sudo bash
• For RECALBOX
wget -O - "raw.githubusercontent.com/RetroFlag/retroflag-p…; | bash
• For BATOCERA
wget -O - "raw.githubusercontent.com/RetroFlag/retroflag-p…; | bash
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
[Links]

♦ Scripts for Nespi 4
• github.com/RetroFlag/retroflag-picase
█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█