How to set the time? NAVIFORCE NF9144 Functional Explanation (All the modes)

This video aims to introduce the operational steps of different functional modes of Naviforce watch.

We got the NF9144 with five functional modes.

The button on the top left side of the face of the watch is named button A.
In counterclockwise order, the second button is button B, the third one is button C and the fourth one is button D.

The mark displayed in this area is a simple criteria for judging what function is operated.
When the week mark appears on the display, such as MON, indicating Monday, it turns out that the watch is in the Timer Mode.
When ALM appears, it indicates the alarm mode, STP indicates stopwatch mode/Chronograph Mode, DT indicates Dual Time Mode, and TR indicates Countdown Mode.

Press B to change your watch into the mode you want.

Set the time, such as 17:10, October 29, 2018.
First of all, press B button to select the Timer Mode.
And press C for two seconds to enter time setting state.
"Second" will blink. You can press A to adjust “Second” to zero.
And then press B to select the other items in turn.
Press button A to adjust the flashing item, like adjusting the value of minute to be 10.
The minute setting is done. Press B to switch into “hour” and adjust it to be 17.

Finally, press button C to confirm.
Press D to switch between 12- / 24-hour time formats in Timer Mode.


Press B button to select the Alarm Mode.

Press A and you can see that -1，-2，-3，-4，-5 or a blank would appear on the right of display. These signals respectively correspond to AL1，AL2，AL3，AL4，AL5 and normal alarm pattern.

When pressing A to switch into the display of blank, you can press D to activate / deactivate the hourly chime function.
A horizontal line will appear on the label of SIG when activating the hourly chime function.
Alarm AL1 is equipped with snooze function. If we would like to set 7:20 as AL1, after pressing A to switch into AL1 with a signal “-1”, press button C for 2 seconds to enter alarm time setting state. Hour will blink and a horizontal line will appear on the label of AL1, which shows that the AL1 function has been activated.
And than press button A to adjust the value to be 7.
Press B to select another item : Minute. And press button A to adjust the value to be 20.
Press C key to confirm and return to AL1 pattern.
At this moment, Press D again to activate snooze function with a horizontal line on the label of SNZ.
If you press D again, the AL1 function and snooze function will be deactivated.
After the snooze function is activated, it will utter “beep” sounds every 5 minutes for 7 times.
The alarm would alarm for 10 seconds when reaching the preset time. Press any button to stop the alarm.

Press B button to select the Chronograph Mode.
Press button D to start timing and press button D again to stop timing. When stopping timing, press C to adjust “Second” to zero.
If you would like to have split timing measurement, press button D to start timing firstly. Press C to activate split timing measurement with the signal of SPL. Press C to deactivate the split timing measurement. Press D to stop the timing and press C to reset the mode finally.
If you want to get the finish time of two competitors, you need to press button D to start timing. And press C to activate split timing measurement when the first competitor breasts the tape, indicating his finish time. When the second competitor breasts the tape, please press D. And press A again to deactivate the split time measurement, indicating the finish time of the second competitor. Press C to reset the mode finally.

Press B button to select the Countdown Mode.
For example, we have to set a countdown of 2:45. Press button C for 2 seconds to enter countdown setting state. Hour will blink. Press A to adjust the value to be 2.
Press button B to switch to“Minute”and also press A to adjust the corresponding figure, 45.
Press C to confirm and return to countdown displaying mode.
When time is set, press D to start the countdown function. After pressing D to stop the countdown function, you can press C and timer will automatically reset to the preset time: 2:45.
When the timer counts to 0 second, the countdown function will stop automatically. It will alarm for nearly 10 seconds. Just press any button to stop the timer.

Available:
Aliexpress: naviforce.aliexpress.com/store/2795078
Twitter: twitter.com/naviforcewatch