Playback starts YouTube’s embedded player (privacy-enhanced mode).
How to Kill a Tree without Cutting It Down
ChannelGreen ShootsDescription from the creator
Kill a tree the easiest way and with certainty and without having to cut it down. You will also turn a tree that is invasive or unwanted into a "snag" which is great habitat for wildlife. You can even kill a large tree in under 10 minutes. The foam herbicide dispenser described in this video is available from greenshootsonline.com/
This video answers critical questions such as:
0:00 Answers to questions you might have about killing a tree
0:14 Can I leave a standing dead tree? As the video makes clear, standing dead trees ("snags") make great wildlife habitat for woodpeckers and pollinators. However, a dead tree will eventually fall, and you have to be sure it will not fall near property, or worse, on people. Therefore, standing dead trees should not be left in areas of high pedestrian traffic.
0:42 Should I use herbicide? Herbicide or weed killer will kill a tree faster and with greater ease and certainty. If you prefer not to use herbicide, I recommend our video: How to Kill a Tree without Chemicals, youtube.com/watch?v=aHj8UMwSMVU .
1:03 What time of year? Fall and winter are the best times. Springtime is especially bad because the tree is sending sap to feed growing foliage.
2:21 how do you use the herbicide? Select the right weed killer such as glyphosate. With glyphosate, mix an herbicide solution with about 20% active ingredients. Use a tool to cut into the bark. This can be a chisel or knife for small trees, a hatchet for bigger trees, and a drill for the larger trees. The objective is to introduce the weed killer into the phloem of the tree which is the liver, inner bark of the tree.
3:49 So, for example, with a hatchet, cut through the outer bark. (The inner bark typically will be lighter in color.)
4:19 Then, apply foam herbicide into the slit immediately. Don't wait longer than a couple minutes to apply the foam weed killer because otherwise the tree will quickly seal off the wound.
4:55 continue cutting slits about an inch apart (and applying herbicide) around the circumference of the tree.
5:18 Don't disturb the tree for about a year. Or, better yet, leave it standing as a "snag."
The advantage of foam herbicide is that it sticks tenaciously to where it is placed and it dissolves slowing allowing the herbicide to absorb over a period of time.
Don't try old home remedies like pounding copper nails into the tree. These don't work as well. (I have never seen a published scientific study on using copper nails to kill a tree.) Those copper nails will also make cutting the tree down a lot more problematic.
This video answers critical questions such as:
0:00 Answers to questions you might have about killing a tree
0:14 Can I leave a standing dead tree? As the video makes clear, standing dead trees ("snags") make great wildlife habitat for woodpeckers and pollinators. However, a dead tree will eventually fall, and you have to be sure it will not fall near property, or worse, on people. Therefore, standing dead trees should not be left in areas of high pedestrian traffic.
0:42 Should I use herbicide? Herbicide or weed killer will kill a tree faster and with greater ease and certainty. If you prefer not to use herbicide, I recommend our video: How to Kill a Tree without Chemicals, youtube.com/watch?v=aHj8UMwSMVU .
1:03 What time of year? Fall and winter are the best times. Springtime is especially bad because the tree is sending sap to feed growing foliage.
2:21 how do you use the herbicide? Select the right weed killer such as glyphosate. With glyphosate, mix an herbicide solution with about 20% active ingredients. Use a tool to cut into the bark. This can be a chisel or knife for small trees, a hatchet for bigger trees, and a drill for the larger trees. The objective is to introduce the weed killer into the phloem of the tree which is the liver, inner bark of the tree.
3:49 So, for example, with a hatchet, cut through the outer bark. (The inner bark typically will be lighter in color.)
4:19 Then, apply foam herbicide into the slit immediately. Don't wait longer than a couple minutes to apply the foam weed killer because otherwise the tree will quickly seal off the wound.
4:55 continue cutting slits about an inch apart (and applying herbicide) around the circumference of the tree.
5:18 Don't disturb the tree for about a year. Or, better yet, leave it standing as a "snag."
The advantage of foam herbicide is that it sticks tenaciously to where it is placed and it dissolves slowing allowing the herbicide to absorb over a period of time.
Don't try old home remedies like pounding copper nails into the tree. These don't work as well. (I have never seen a published scientific study on using copper nails to kill a tree.) Those copper nails will also make cutting the tree down a lot more problematic.
About this tutorial
Green Shoots published this 5:31 video tutorial on October 25, 2018. It has been watched 967,833 times on YouTube.
- Channel
- Green Shoots
- Category
- Science & Technology
- Duration
- 5:31
- Published
- October 25, 2018
- Views
- 967,833
- Likes
- 2,738
Tags
Share
This tutorial in other languages
- FRComment tuer un arbre sans le couper vers le bas
- ESCómo matar a un árbol sin cortarlo
- PTComo matar uma árvore sem cortá-lo para baixo
- ITCome uccidere un albero senza tagliare It Down
- DEWie man einen Baum Töten Sie es ohne das Abholzen
- NLHoe maak je een Tree doden zonder Cutting It Down
- RUКак убить дерево без резки It Down
- PLJak zabić drzewo bez je ścinać
- JAそれを伐採せずに木を殺すためにどのように
- ARكيف تقتل شجرة دون تقطيع وأسفل
- HIयह काटना नीचे के बिना एक पेड़ को मारने के लिए कैसे
- IDCara Membunuh Pohon tanpa Cutting It Down